Mechanical filters with inox steel filtering cartridge

FM mechanical filters GAR type have been designed for use on delivery before the parts of adjustment or in aspiration before the compressor. They may be used for filtering of particles on the oil circuit. The FM filter is composed of a stainless steel filtering element with a 73 mesh filtering threshold. Its large filtering surface produces low loss of load and good filtering capacity. All the filters are nitrogen pressure tested to ensure a perfect fit. FM range filters are epoxy-polyester powder-coat ed to ensure perfect resistance to corrosion in saline chamber for 350 hours.

Materials
The filter body is stainless steel. The flare connection unions are in copper steel, the unions to be welded are in copper steel or copper (5/8-3/4-7/8 inch)
The net in in steel AISIS 304.

Installation
The installation orientation can be both vertical or horizontal, The direction of the flow must be in accordance with the arrow on the label.

Operating conditions
Ts -40°C + 80°c Ps max 45 bar
Refrigerant fluids HFC, HFO, HC, blends

Related products

Brass couplings

Block valves 2 ways

Filters driers with molecular sieves

Check valves