Combined filters drier and receiver

The FGC serie represents the ideal solution for the small her metic refrigeration plants. The filter drier with the receiver is suggested when the condenser is unable to contain the totale amount of refrigerant fluid presents in the plants. Its double function reduces the cost eliminating the receiver. The use of 100% molecular mesh makes the filters compatible with most of refrigerant fluids and allows maximum absorp tion of humidity even at high temperatures which would not be possible with the addition of silica gel and active alumina. The entire line has been designed for use with almost all of the refrigerants present on the market, i.e. fluids classified in Arti cle 13, paragraph 1, letter (b), of Directive PED 2014/68/ EU as part of Group 1 and Group 2; most of these fluids are indicated in Annex E of standard EN 378-1 as Class A1, A2L and A3. All the filters are nitrogen pressure tested to ensure a perfect fit. FGC range filters are epoxy-polyester powder-coated to ensure perfect resistance to corrosion in saline chamber for 350 hours.

Materials
The filter body is stainless steel. The flare connection unions are in copper steel while the un ions to be welded are in copper steel or copper (5/8 inch) The elimination of mechanical particles is assured by a net and a filter cloth of 20 micron.

Installation
The installation orientation can be only in vertical with flow di rection pointing down, to avoid stagnation of fluid. The direction of the flow is well indicated with an arrow on the label.

Operating conditions
Ts -40°C + 80°c Ps max 45 bar
Refrigerant fluids HFC, HFO, HC, blends

For use with fluids other than those explicitly indicated, please contact GAR srl

Related products

Brass couplings

Oil separators

Oil separators automotive

Capillary tubes