FG ORS range filters have been designed to be filter in the au tomotive field. The use of 100% molecular mesh makes the filters compatible with most of refrigerant fluids and allows maximum absorption of humidity even at high temperatures which would not be possible with the addition of silica gel and active alumina. The entire line has been designed for use with almost all of the refrigerants present on the market, i.e. fluids classified in Arti cle 13, paragraph 1, letter (b), of Directive PED 2014/68/ EU as part of Group 1 and Group 2; most of these fluids are indicated in Annex E of standard EN 378-1 as Class A1, A2L and A3. All the filters are nitrogen pressure tested to ensure a perfect fit. FG ORS range filters are epoxy-polyester powder-coated to ensure perfect resistance to corrosion in saline chamber for 350 hours. Seals sold separately
Materials
The filter body is stainless steel. The flare connection unions are in copper steel. A net and a filter cloth at the outlet of GAR range FG ORS filters ensure the elimination of 20 micron mechanical particles.
Installation
The installation orientation can be both vertical or horizontal, but GAR suggests vertical with flow direction pointing down, to avoid stagnation of fluid. The direction of the flow must be in accordance with the arrow on the label.
Operating conditions
Ts -40°C + 80°c Ps max 45 bar
Refrigerant fluids HFC, HFO, HC, blends
For use with fluids other than those explicitly indicated, please contact GAR srl