Brass couplings
This kit, series 707, has been designed for use on all flare components.In order to assure a perfect tightness and the greatest reliability, a copper seal with long tang has been designed. It makes the assembling stage easier and assures a perfect centering.It is advisable to replace this seal each time you dismantle the equipment. […]
Copper / steel couplings
The kit type 707A has been designed for use on all flare com ponents, it allows to transform the flare couplings in solder couplings. In order to assure better tightness it is composed by a 45° cou pling made of stainless steel and by a copper tube. The copper seal with a long tang has […]
Oil separators
The coalescent oil separators GAR type SOC set the industry standard for energy-efficient performance. Unlike conventional separators, coalescent oil separators are not dependent on velocity for efficiency, maintaining the same level of effectiveness down to 20% of maximum flow. The entire line has been de signed for use with almost all of the refrig erants […]
Oil separators automotive
The oil separators SOC Automotive have been designed for the automotive field. The coalescent oil separators set the industry standard for en ergy-efficient performance. Unlike conventional separators, coalescent oil separators are not dependent on velocity for ef ficiency, maintaining the same level of effectiveness down to 20% of maximum flow. The entire line has been […]
Capillary tubes
The capillary tubes type 600 are made of copper diam. 1,63×2,8 mm. and complete of forged nut. The type 600CA is characterized by the opener valve which close the charging valve at the moment of the disassembly avoiding the empting of the system. The type 600CO is characterized by the final part of the cap […]
Ball valves
The ball valve GAR type VSG are intended to be used into cool ing and conditioning systems with the function to intercept the fluid and to stop or throttle the flow of refrigerant to a part of the system. Suitable for use in liquid and suction line. Thanks to its bi-flux construction, the valve can […]
Safety valves
The safety valves GAR type VDS have been designed to protect the refrigeration and conditioning system against possible over pressure different from that they have been designed for. The safety valves type VDS are in automat ic intervention. Valve opening is produced by the thrust of the fluid in pressure on the obturator when this […]
Filters driers with molecular sieves
The copper filter dryers GAR type SM contain universal molec ular sieve XH9 with the highest adsorption capacity available on the market. Very high resistance to corrosion, highest working and burst pressures. Materials Superior quality copper DHP 99.9 Installation The orientation can be both vertical or horizontal. The direction of the flow must be in […]
Block valves 2 ways
Service valve 2 ways GAR type VB has been designed to be used on split system to connect the external unit with the in ternal one. The body is complete of a / flare connection with mechanism to simplify the vacuum and charging system. Construction materialsBrass CW617N Obturator CW614N Oring HNBR Installation They can be […]
Mechanical filters with inox steel filtering cartridge
FM mechanical filters GAR type have been designed for use on delivery before the parts of adjustment or in aspiration before the compressor. They may be used for filtering of particles on the oil circuit. The FM filter is composed of a stainless steel filtering element with a 73 mesh filtering threshold. Its large filtering […]